PCB design services must be provided by skilled professionals with enough experience to come up with the optimum physical layout for a client’s printed circuit board. They must have the resources and capability to deploy the latest CAD software and other PCB design tools to handle complex designs and all kinds of boards. Generally speaking, the designing process has the same multiple stages irrespective of the type of board and the layout, and it all begins with schematic captures.
Designers typically require that clients should provide basic information regarding three key matters. The most important of them is the schematic, but it may alternatively be in the form of a netlist file. This is a file containing connectivity details and component descriptions.
The BOM or bill of materials is another key requirement which contains a listing of all the components to be used and their footprints. Some designers offer to do the component footprint capture process too. All this and the board outline together provide the designer with everything needed for getting started with the design process.
There are many intermediate techniques used in several stages that build on the schematic or netlist. These functions include things such as library development, signal integrity checks, stress analysis, thermal simulation and EMI checking. All this leads up to the generation of the gerber file. This is the most commonly used format used for transferring complete PCB images ready for manufacturing.
Electrical and electronics circuit designers are expected to be able to work with and create complex designs for digital, analog, RF and mixed PCBs. The boards themselves may be single or double sided or multi-layered. They can be designed to match the customer’s needs in different sizes with varying pin densities and component quantities.
There’s also the question of deciding on the characteristics of the board. This refers to the method used to mount components and create the traces for the circuit. Surface-mount technology is the most popular technique used now for mounting components.
Components on boards that use this technology have their end caps soldered on the same side as the components themselves. This is hugely different from earlier techniques such as through-hole boards. The leads of components in such older boards were inserted through holes and soldered on to the traces on the other side.
In addition to designing new boards, PCB designers are often called upon to perform other tasks. For instance, one common service is an evaluation of an existing design, its components and the footprint captures. They may also be asked to help out with procuring prototypes, check for availability and price information against the bill of materials.
As a matter of fact, PCB design services continue to be required even after the product is delivered. Customers frequently need to make changes, and reorders bring a lot more business. Reverse engineering is another service that needs a highly skilled designer. In this case, the designer is given the gerber file and must come up with the schematic or netlist, which the client can then use for making wide-ranging changes.
Designers typically require that clients should provide basic information regarding three key matters. The most important of them is the schematic, but it may alternatively be in the form of a netlist file. This is a file containing connectivity details and component descriptions.
The BOM or bill of materials is another key requirement which contains a listing of all the components to be used and their footprints. Some designers offer to do the component footprint capture process too. All this and the board outline together provide the designer with everything needed for getting started with the design process.
There are many intermediate techniques used in several stages that build on the schematic or netlist. These functions include things such as library development, signal integrity checks, stress analysis, thermal simulation and EMI checking. All this leads up to the generation of the gerber file. This is the most commonly used format used for transferring complete PCB images ready for manufacturing.
Electrical and electronics circuit designers are expected to be able to work with and create complex designs for digital, analog, RF and mixed PCBs. The boards themselves may be single or double sided or multi-layered. They can be designed to match the customer’s needs in different sizes with varying pin densities and component quantities.
There’s also the question of deciding on the characteristics of the board. This refers to the method used to mount components and create the traces for the circuit. Surface-mount technology is the most popular technique used now for mounting components.
Components on boards that use this technology have their end caps soldered on the same side as the components themselves. This is hugely different from earlier techniques such as through-hole boards. The leads of components in such older boards were inserted through holes and soldered on to the traces on the other side.
In addition to designing new boards, PCB designers are often called upon to perform other tasks. For instance, one common service is an evaluation of an existing design, its components and the footprint captures. They may also be asked to help out with procuring prototypes, check for availability and price information against the bill of materials.
As a matter of fact, PCB design services continue to be required even after the product is delivered. Customers frequently need to make changes, and reorders bring a lot more business. Reverse engineering is another service that needs a highly skilled designer. In this case, the designer is given the gerber file and must come up with the schematic or netlist, which the client can then use for making wide-ranging changes.
About the Author:
You can visit the website www.tritecdesign.com for more helpful information about PCB Design Services For Electronics Manufacturers
#end
PCB Design Services For The Electronics Industry PCB Design Services For The Electronics Industry
Article Source: http://magazine-articles.tumblr.com/post/70292586141
0 comments:
Post a Comment